Loading your local time…
chris gierman

Photos by Chris Lopez @chrshoots and @meanbean_media

The VW That Caught Fire in 72 Hours: One Builder’s Seven-Year Journey

When Chris Gierman traded his cammed VW Jetta GT for a 1999 Wolfsburg Edition Golf in October 2018, he had no idea he was starting a seven-year journey that would test his skills, patience, and dedication to the build. What began as a simple trade became an immediate baptism by fire, literally and figuratively.

A Rocky Start

The Golf’s journey to Chris’s garage started with disaster. An hour away from home, the water pump failed, causing severe overheating. Chris ended up flat towing the broken Golf back with the very Jetta he was trading away. Despite the rough condition, he proceeded with the trade, feeling bad for the seller’s predicament.

The next day, Chris tackled the blown head gasket. Keep in mind, he was primarily an audio guy at this point with limited mechanical experience. He got the car running and drove it to Walmart. That’s when things got worse. An injector o-ring failed, spraying fuel directly onto the alternator. The car caught fire.

Within 72 hours of ownership, Chris had dealt with a blown head gasket, an engine fire, and a complete rebuild.

The story gets better. About a week later, the original owner listed the Jetta for sale. Chris bought it back for the price of a blown-up car and used it as a donor vehicle, swapping everything over, including the interior.

Learning Through Adversity

Chris bought the Golf just one week before starting his career as an automotive technician. The car served as his daily driver while he learned the trade, and every skill he gained at work went straight into improving the VW. Six months into ownership, he wrapped it in 3M Gloss Ivory.

Then came another setback. The timing belt tensioner failed. Because of the performance cam he’d installed, the engine had become an interference engine. All the intake valves bent. Chris took one week, bought new valves, and rebuilt the head. Then he kept driving it.

All of this happened in the first year of ownership.

The Long Game

Eventually, Chris acquired a dedicated daily driver, which freed him up to really dig into the Golf. He’d always loved browns and earth tones, so the color direction was clear. The two-tone concept came from a spontaneous idea with his friend.

Before paint could happen, disaster struck again. Chris hit a construction zone bump, and something kicked up into the timing belt area. The car went on jack stands for another eight months. Who hasn’t been there? During that time, Chris and his friend painted and built two other people’s cars, putting his own project on the back burner.

After swapping the engine, Chris got the car running again. Within two months, they finished the bodywork and sealed the car. One week later, his friend laid down the paint: Chevy white on top with three coats of House of Kolor micro gold flake, and brown with silver flake on the bottom.

That was over four years ago. In the two years following paint, Chris went through twelve sets of wheels, constantly refining the look.

The Houston Connection

The next phase addressed the trunk setup and engine bay. Since the car runs static suspension, it had always needed a fuel cell. The engine bay needed attention too. Within one month, they shaved, rubbed, and painted it. Chris also wire-tucked the bay and refreshed the engine.

Life got in the way. Between wiring mistakes and going through a divorce, the car sat for fourteen months. Chris moved and towed the Golf with him. Shortly after getting settled, he got it running and found a set of Limited 957 blades. The look was coming together, getting back to his Houston roots.

Chris had always joked about throwing 84-spoke wire wheels on the car but only if he found the right deal. A year and a half later, he spotted a set on Facebook with tires for $700. He bought them, sold the Vogues for $200, and ended up with Texan Wire Wheels for $500 with caps included. He stretched tires onto them and mounted them up.

The plan now is to continue embracing Houston slab culture inspiration with a built head featuring a ram intake, peanut butter interior, and a ragtop sunroof.

The Build Specs

Chris’s 1999 Volkswagen Golf Wolfsburg Edition (a Mexico-built 3VW VIN car) packs serious work under the hood. The 2.0 ABA is an OBD1 engine with a forged crank and oil squirters. It features a Techtonics 280 cam, oversized 42mm intake valves, a ported and polished head, dual valve springs, and hydraulic lifters. The custom intake sits atop billet aluminum pulleys, and there’s a water pump conversion. Chris deleted the A/C, power steering, and heat for simplicity. A six-puck spring clutch handles power delivery through Techtonics headers. The engine sits one inch higher than stock.

Suspension uses a VAG camber kit up front with custom drop plates in the rear. Rev9 coils with 34k Swift springs provide the stance. The fuel system runs a 10-gallon cell with Evil Energy lines, an external pump and filter, and a relocated battery.

Interior details include the OEM option rear bench (super plush), Jetta GLX door cards, chrome interior and exterior handles, and chrome climate knobs. A Raptor wood grain steering wheel from a Houston company sits on a custom hub adapter.

The Takeaway

Chris Gierman’s Golf build proves that the best projects aren’t the ones that go smoothly. They’re the ones where you learn, adapt, and push through. Seven years of setbacks, rebuilds, and refinements have created something uniquely his. For anyone considering a build, this story shows that persistence beats perfection every time.

Subscribe